MoVI Pro+ 6x TB50 Batteries + ReadyRig Kit: RED/ARRI/URSA power & monitor cable
Rental Description
MoVI Pro + ReadyRig kit with 6x TB50 batteries, high speed 4x parallel charger, RED DMSC2 Converter kit and 37″ lightweight+thin RED monitor cable, built to operate with any RED camera – Helium/Weapon/Dragon/Epic/Scarlet .
Probably the most advanced motorized gimbal system for handheld applications in the world.
From the people that invented electronic handheld stabilizers. Max. payload is 6.80kg/15lbs
You get to rent the MoVI pro in a beautiful pelican case, with all the accessories you’d be looking for to operate for hours on end, with a decently loaded RED Weapon / Alexa Mini etc. ready to fly and create high-end visuals.
This package includes:
– MoVI Pro full rig, with carbon fiber body, ultra-light weight in every component and built-in stand
– Six TB50 batteries: hot swap, ultra-light weight, allow for a total of approx. 8 hours runtime without recharging (with a slim package)
– 2x TB50 adapters to the MoVI
– 4x parallel charger for the TB50 batteries, charging 4 simultaneously (far superior to the cylinder-shaped one)
– RED Camera power directly from the MoVI for operation, with approx. 3 hours of runtime for both camera, accessories and MoVI Pro
– Power RED systems through the included D-Tap, Tilt D-Tap, Tilt USB, or Spine D-Tap outlets. You can power an Alexa with an additional cable as well (not included in this kit though).
– Twice the torque of the original MoVI system
– The Mimic system (separate operator steering the camera roll/pan/tilt) with handles
– Swap between handheld, drone attachment or car attachment within minutes
– MoVI Ring Pro
– MoVI Classic Handle Rig
– Low Profile Handle
* Weight (w/o batteries): 2.65kg/5.84lbs
* Camera cage dimensions: 196 x 200 x 175mm (L*W*H)
* Maximum payload: 6.80kg/15lbs
Additional items:
Wooden Camera NATO set
RED Lemo adaptors
Cables, hex keys, screws, accessories
Ready Rig Gimbal Stabilizer / Handheld Assist with ProArms
Supports up to 40lbs load – gimbal + camera, or handheld camera.
If you need to carry your MoVI Pro or Ronin 2, with a fully decked out RED/Alexa package on it, the ReadyRig+ProArms will be an enormous support to you. It distributes the weight of a gimbal onto your hips, and allows for long shots with gimbals, or all day operating with handheld rigs.
-Vertical axis stabilization
-Quick release connector for gimbals
-Carbon fiber ProArm rods, CineMilled with Monitor Mounts
-Precision engineered aerospace grade aluminum
-Compatible with any gimbal
-Comes with soft carrying case
This kit includes 6x TB50 Batteries, 2x MoVI Battery adapters, and 1x High Speed Charger that can charge 4 batteries simultaneously – far superior to the cylinder-shaped standard charger.
Basically a great add-on if you’re looking to beef up your MoVI setup.
DJI TB50 Battery Specs, each ———–
Capacity: 4280 mAh
Voltage: 22.8 V
Battery Type: LiPo 6S
Energy: 97.58 Wh
Net Weight: 515 g
Charging Temperature: 41° to 104° F (5° to 40° C)
Operating Temperature: 14° to 104° F (-10° to 40° C)
Max Charging Power: 180 W
Adapter Features————-
Add high-capacity batteries to your MōVI Pro or MōVI Carbon handheld gimbal system using this 2-pack of TB50/TB55 Battery Adapters from FREEFLY. The two adapters mount onto your MōVI Pro or MōVI Carbon to replace the original adapters to allow you to use high-capacity DJI TB50 or TB55 batteries for extended shoots.
The durable aluminum adapters mount securely onto the rig with a clamp, and the batteries are secured with a locking mechanism. The units then plug into the gimbal rig using Molex connectors. The batteries are compatible with the MōVI Pro and MōVI Carbon firmware to show battery status on the gimbal screen.
Charger Specs: —————-
– Specifically designed for DJI TB50 Batteries
-It can charge 4 TB50 batteries at the same time, fully charge 4 batteries about 70 minutes (compared to 180 minutes from the standard charger, which only charges 2 batteries at the same time)
– Built-in intelligent protection, over charged protection, intelligent cooling, short circuit protection.
– Compatibility: Ronin 2/Inspire 2 TB50 intelligent battery
– Input: AC 100-240V
– Output: DC 26V/4A * 4 (Max)
– USB output: 5V/3A*4 (Max)
– Charging time: 4 batteries about 70 minutes
– Charging temperature: 7 ℃ to 40 ℃
– Material: ABS + metal
ReadyRig Only:
https://www.sharegrid.com/losangeles/l/78136
- 1x (Optional) ARRI Power Cable
- 1x (Optional) URSA Power Cable
- 1x 2 MoVI Pro Chargers
- 1x Jason Case
- 1x MIMIC + Handles
- 1x ReadyRig
- 1x ReadyRig ProArms
- 1x RED Monitor Cable
- 1x RED Power Cable
- 2x TB50 to MoVI adapters
- 6x TB50 Batteries
- 1x (Optional) ARRI Power Cable
- 1x (Optional) URSA Power Cable
- 1x 2 MoVI Pro Chargers
- 1x Jason Case
- 1x MIMIC + Handles
- 1x ReadyRig
- 1x ReadyRig ProArms
- 1x RED Monitor Cable
- 1x RED Power Cable
- 2x TB50 to MoVI adapters
- 6x TB50 Batteries