ARRI S60-C LED Softlight w/ rolling Combo, Pipe/Grid Clamp, 33ft Header Cable

The legendary Skypanel S60-C with its full RGBWWWW capabilities (incl magenta/green tint and full bicolor adjustments next to the RGB Mode) with everything you’d need on the ground or up in the grid: rolling combo and pipe clamp with junior receivers, and a 33ft header cable for complex rigging.

ARRI continues to broaden its LED line and reaffirm its commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8″ and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2000W tungsten soft light while drawing a maximum of only 450W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C can be adjusted to output a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you’re lighting for blue or greenscreen, you can simply dial in your chosen color. This wide degree of control is responsible for a high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions, as well as 0-100% dimming, can be adjusted locally with the SkyPanel’s onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive or any PC/Mac.

The SkyPanel S60-C can be used worldwide thanks to its included 90-250 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1 1/8″) pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.

SPECS ‐————-
Panel Surface Area: 25.4 x 11.8″
115° Beam Spread, Rail Mount Adapter
Color Temperature from 2800-10,000K
Full Gamut Color Mixing
Hue and Saturation Control
Full Minus to Full Plusgreen
CRI: 95, TLCI: 90
0-100% Dimming, DMX Control
Multi-Voltage AC, Optional Battery Power

PHOTOMETRICS / LIGHT OUTPUT ———–‐
At 16.4′, 3200K, With Standard Diffusion: 393 lux / 37 fc
At 16.4′, 5600K, With Standard Diffusion: 416 lux / 39 fc